No products in the cart.
Shop
-
Individual A512 memory expansion for Amiga 500
he A512 is our interpretation of a 512kByte trapdoor memory expansion for the A500 computer. This means that it’s not just yet another copy of a product that was available from lots of second-source manufacturers during the late 1980s and 1990s, but it is looking at the needs of all A500 owners today:
- 512k RAM
- pass-through port for use in Amiga 500+
- space for an RTC module
- compatible with ECS Agnus types for Chipram expansion
- safe operation with OCS Agnus 8370 and 8371
Today’s collectors and computer restauration experts like to keep a separate computer with a full OCS chipset and just a trapdoor memory expansion for the classic 0.5M Chipram and 0.5M ranger-mem configuration. With many second-source memory expansions using megabit memory chips, the setup will tend to run unstable, because the OCS Agnus types 8370 and 8371 will not generate enough refresh-addresses for most trapdoor memory expansions that use less than 16 memory chips.
Our A512 memory expansion will run properly with all Agnus types, including OCS chips. Thanks to an additional refresh circuit, the single 4MBit memory chip will get enough refresh addresses to keep it’s contents in any configuration, while running cool at the low power consumption that the more modern memory architecture provides.
When operated in an A500+ computer, the A512 will be used as Chip ram, and two of these expansions can be cascaded to reach the maximum configuration of 2MBytes graphics memory (1 MByte on the main board, and 1 MByte in the trapdoor slot). The pass-through port is compatible with any other 512k trapdoor expansion, as long as it fits mechanically. The A500+ on-board RTC is only switched off if the RTC module has been installed on the A512 card, or an RTC on the second card is present.
The A512 memory expansion is compatible with all motherboard revisions from Rev.3 to Rev.8, including the A500+. Picture may vary – the 2020 production run looks a bit different, but is functionally identical.
€24,95€31,19 -
-
Commotron gamepad C64G style – wireless [NEW]
Wireless joystick for all Atari-compatible joystick ports. Brand new and ultra-fast response! A must have for fast games. Other versions available.
TURBO 2000 SUPER Wireless Power! 😜
The new GamePad for real computers!
Up to 6 meters / 20 feet wireless distance!
Standard Commodore / Amiga Joystick Interface!
3 real fire buttons (pot x and y standard)
4 speed programmable Autofire!
Memory function for button mappings
Commodore, Amiga, Atari ST, VCS 2600 7800 and Spectrum compatible
Runs on 2 standard AAA batteries (not included)
UP arrow mapped to separate Jump Button for best GamePad feeling!
€37,50€39,95 -
WIC64 – Wifi module for the C64/128/SX64
The WIC64 Wifi adapter is the most versatile WiFi option available. Based on an ESP32 Wifi module, the device is very easy to install, setup and use. The WIC64 can be setup and controlled using the launcher program but also directly integrated into your own programs. Features like online chat, Google Earth, SID Radio and multiplayer games are among the cool features this device brings.
We supply WIC64s fully assembled, pre-programmed with the latest firmware (very easy to upgrade online) and delivered in a high quality resin printed case with vynil label.
€44,95€49,95 -
Amiga 2000 Gotek / Raspberry Pi SD Slot 3.5″ Floppy Drive Replacement (3D STL Download)
Replace one of your 3.5″ Floppy Drives with a Gotek Floppy Drive & Raspberry Pi SD Slot Combo Bay
€5,00 -
Amiga 2000 Gotek / SCSI2SD/Zulu 3.5″ Floppy Drive Replacement (3D STL Download)
Replace one of your 3.5″ Floppy Drives with a Gotek Floppy Drive & SCSI2SD/Zulu Combo Bay
€5,00 -
Retro8BIT Plug and Play USB Stick
Unlock Nostalgia with the Retro8BIT Plug&Play USB Stick!
Are you ready to dive back into the golden age of gaming? Introducing the Retro8BIT Plug&Play USB Stick, your all-access pass to relive the iconic era of the Commodore 64. With nearly 2000 classic commodore games pre-loaded, you’re set for endless hours of pixel-perfect joy.
Plug, Play, and Relive History — No Setup Required!
Just plug the USB into any Windows PC with an internet connection, click, and start playing. It’s that simple! No complicated setup, no additional downloads. Instantly jump into classics like Maniac Mansion, The Last Ninja, Bubble Bobble, and thousands more.
Why Choose the Retro8BIT Plug&Play USB Stick?
- Massive Library: With almost 2000 games, rediscover your childhood favorites and uncover gems you never got to play.
- Easy to Use: Just plug into your PC and play. No technical skills needed.
- Perfect for Collectors and New Fans: Whether you’re a retro enthusiast or a newcomer wanting to experience the charm of retro gaming, this collection has something for everyone.
- Commodore Games always in your pocket, ready to play!Great Gift: A unique gift for gamers of all ages. Perfect for friends, family, or even as a special treat for yourself.
This collection is a must-have for any retro gaming enthusiast. Supplies are limited, so don’t miss your chance to own a piece of video game history!
Order now and start your retro adventure with the Retro8BIT Plug&Play USB Stick! Just click, play, and let the good times roll!
€5,00 -
-
Squirrel Scsi interface for Amiga 1200/600
Add a SCSI CDrom to your Amiga 1200!
€75,00€149,00 -
Buddha Flash
Buddha is an IDE controller for the Zorro slot of Amiga computers.
- Autoboot with Kickstart 1.3, 2.0, 3.0, 3.1, 3.2
- two IDE-Ports for up to four IDE-devices, additional clockport
- compatible with nearly every IDE/Atapi devices:
- harddisks
- DOM (Disk-On-Module) modules (40-pin)
- Industrial-CF cards
- CD/DVD drives
- Installer for automatic partitioning and installation of OS versions 1.3, 2.1, and 3.1
- Automatically installs support for CD/DVD drives
- OS 3.2 can later be installed over the OS 3.1 installation (also from CD)
- Installation of OS 3.1 and OS 3.2 both work with either OS 3.1 or 3.2 ROMs installed.
Transfer rates of more than 2.2 MBytes per second can be reached. The raw data transfer rate is only limited by the zorro bus: 3.58 MBytes per second. The latest 20-year anniversary edition can even reach higher speeds using the Fast-Z2 mode of the Z4 board.
Harddisks larger than 4GiB have been a problem for the Amiga for a very long time. The Buddha supports both the TD64 and NSD64 standards to overcome this limitation. The included automatic installer can partition, format and install drives of any size, and it comes with the PFS3 filesystem to format partitions bigger than 4GiB.
€59,95