Run Stop Re-Store
- Utrechtseweg 47H, Utrecht, Netherlands
- info@runstoprestore.nl
- Run Stop Re-Store
- 82010056
- NL003628252B79
- KNAB
- NL56KNAB0617736316
-
MOS318019-02 Basic High ROM for the C128 (New Old Stock)
MOS18019-02 Basic High ROM for the Commodore 128.
New old stock, date codes may vary
Price includes EU Tax
€7,50 -
Toshiba TC514256AZ-70 256kx4bits 128KB ZIP RAM (New Old Stock)
Toshiba TC514256AZ-70 256kx4bits, 128KB per chip ZIP RAM. Used in many 6 bit era machines, e.g. Amiga 3000, Videotoaster, memory expansions etc..
New old stock, date codes may vary
Price includes EU Tax
€4,95 -
MOS380620-01 FPLA1 (U39) for the Commodore A1060 Sidecar (New Old Stock)
MOS380620-01 FLPA1 (U39) for the Commodore A1060 Sidecar.
New old stock, date codes may vary
Price includes EU Tax
€29,95 -
MOS380621-01 FPLA2 (U40) for the Commodore A1060 Sidecar (New Old Stock)
MOS380621-01 FLPA2 (U40) for the Commodore A1060 Sidecar.
New old stock, date codes may vary
Price includes EU Tax
€29,95 -
J-CPU64 6510/8500 replacement for the Commodore 64
The J-CPU64 has arrived!
- The long awaited MOS/CSG 6510/8500 CPU replacement is here! Jani’s second major hardware product after the very successful J-CIA64 comes in the form of the J-CPU64.
- Limited first batch stock, all pre-orders will be fulfilled first starting shipping from May 16th onwards.
Description and features:
- FPGA based replacement for MOS/CSG 6510 & 8500 CPU chips.
- Lower power requirements, less heat! Actually; not discernible heat at all.
- Complete logic and all features of the original IC implemented, including illegal opcodes for maximum compatibility with all your favorite games and demos.
- All diagnostic & software tests passed 100%, including all tests in Wolfgang Lorenz’s test suite and Vice-project’s CPU-tests.
- Hundreds of demos and games already tested, with no known compatibility issues in tons of different configurations.
- Physically about the same size as the original CPU and drops right in place of the original chip without any board modifications or soldering required.
- Tested with all C64 mainboard revisions, SX-64 and with modern clones like the EVO64, Blue Pearl and the iComp’s Reloaded MKII.
- Tested with modern chip replacements like the VIC-II Kawari, PLA replacements like PLAnkton, NeatPLA etc, and of course J-CIA.
- Load of peripheral hardware tested and found to be compatible including (but not limited to) different types of floppy drives, fast loaders, Ultimate-II+, SD2IEC, TapeCart, Kung-Fu Flash, EasyFlash, Tapuino and more.
- Specially designed clock out signal circuitry (PHI2) for super strong and stable clock signals, with sharp rising and falling signal edges ensuring maximum stability and compatibility.
For EU customers, price listed includes applicable VAT rate
€39,95 -
PLAnkton-TED for the Commodore 16/116
PLAnkton-TED for the Commodore 16/116. Drop in replacement for the 251641-02 PLA chip.
Does not fit the Plus4 due to heigh constraints. For this another product is needed.
Manufactured by eslapion.
For EU customers, price listed includes applicable VAT rate
€19,95 -
Space Saver Pro
The SpaceSaver Pro cable for the C64 and VIC20 CR* is THE solution to the inefficient use of space that traditional power cables cause by connecting to the power-plug in a straight line. Because of the elbow design, the power-cable leaves the computer at a 90 degree angle towards the back, reducing the cable footprint dramatically.
This high quality cable not only is fully injection moulded, it also has a built-in overvoltage protector on the 5V supply, to avoid damage by faulty power supplies. A small window in the connector allows you to see the led indicator, where green means all is ok, but red indicates an overvoltage. Whenever the 5V rail goes over the 5.4V threshold, the circuit inside will cut the power within nanoseconds, to prevent any harm to the chips inside your beloved machine.
Your power supply plugs right into the female DIN connector, and the 30cm long 20AWG grade wiring in between the connectors makes sure this cable can handle currents up to 3.5A. A grippy surface makes plugging in and removing the cable easy, avoids stress on the internal cable joints, and there is enough clearance to accommodate the many variances in case/socket depth, which prevents the cable casing from putting permanent stress on the power socket.
*The VIC20 CR (cost reduced) version uses the same power connector as the C64, and has a separate +5V rail which is susceptible to overvoltage from a bad PSU.
See the extend product description below for more details.
For EU customers, price listed includes applicable VAT rate
€17,95 -
€3,00
41256 (256K*1, 32Kb) DRAM
€3,00 Select options This product has multiple variants. The options may be chosen on the product page -
SPL Blue-64 (V1)
Connect your favourite bluetooth gaming controller or keyboard and enjoy your C64 from the comfort of your couch with the officially licensed SPL Blue-64 adapter
New hardware revision making mounting and updating even more versatile!
- Easy installation by just plugging the adapter on the onboard keyboard connector and then plugging your keyboard on to the adapter.
- No mainboard modifications or soldering required on the computer side.
- Easy pairing by following the native bluetooth pairing instructions of your controller/keyboard. No action required on the computer side, other than turning it on.
- Easy firmware upgrades through the built-in micro-SD card slot (SD-card not included).
- PCB is the same for all revisions. Just choose for which type you are going to use it, and we’ll solder the connector on the appropriate side for you.
For a full list of supported controllers and instructions, please read the extended product description below.
For EU customers, price listed includes applicable VAT rate
€34,95SPL Blue-64 (V1)
€34,95 Select options This product has multiple variants. The options may be chosen on the product page -
€24,95
USBSID-Pico by LouD (V1.3)
€24,95 Select options This product has multiple variants. The options may be chosen on the product page -
SPL HD-64
The HD-64, designed and manufactured by SPL, is a modern modulator replacement for the Commodore 64, that creates crystal clear HDMI output, by digitally creating the video signal directly from an existing VIC-II chip or Kawari.
Features:
- Replaces the stock modulator.
- Micro HDMI out provided through bv RF opening in case
- Full-HD (50 for PAL, 60 for NTSC) HDMI output with stereo audio
- < 1ms latency
- Configurable color-palette scanlines, “blur” (or “anti-aliasing”), aspect ratio, mono-stereo audio
- Analog to digital audio conversion up to two SID channels
- Automatic PAL/NTSC detection
- Compatible with all original motherboards (including shortboard)
- Shortboard version draws power from original modulator pins, longboard needs additional wire.
- Analog video still available on AV connector, both composite and S-Video
- S-Video voltage corrected to work on any standard CRT (that supports S-Video)
- Firmware updates via USB-C
- Future capabilities already beeing worked on: configurable scaling (integer scaling, overscan)
- We now also offer a 3D printed mounting bracket. You can find it here. Designed for longboards (but usable on shortboards with alternative fastening methods).
For EU customers, price listed includes applicable VAT rate
€109,00 -
SPL HD-64 mounting bracket
High quality 3D printed mounting bracket with brass screw inserts for the SPL HD-64 HDMI modulator.
You can choose between a longboard only and a combo version which can fit both longboards and shortboards. I’m offering the longboard only one at a 20% discount at the moment.
Includes 3xm2 (longboard) and/or 3xm1.4 (shortboard) screws for the bracket to C64 pcb fixt and 4xm3 metal screws for the HD-64 to bracket fix.
€10,00 – €13,50SPL HD-64 mounting bracket
€10,00 – €13,50 Select options This product has multiple variants. The options may be chosen on the product page
