- You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart. View cart
-
Price range: €99,95 through €119,95 -
New and original power switch for Commodore 64, 128 wedge, CD32 and 1541-II & 1581 diskdrives
All new and original spare part. Produced in 2023. Fits the Commodore 64, 128 wedge model, Amiga CD32 and the 1541-II & 1581 diskdrives as a drop in replacement.
Price listed includes applicable VAT rate
€5,25 -
S-Video Composite Dual Mono cable for Commodore
High quality factory made videocable for a wide range of Commodore 8-bit computers, including the C64, C128 and C16/+4. (NOT for use with the C64 Ultimate, see extended description below).
8 PIN DIN molded plug on the computer side and  mini-DIN for S-Video output and RCA for Composite and dual mono audio outputs (intended for single SID machines).
Includes a 330R resistor on the Chroma line to further improve image quality on modern screens. Length 1.5M.
To split the mini-DIN into separate Chroma/Luma RCA connectors (for example to connect to a 1701 or 1084) we have a splitter cable available:Â https://www.retro8bitshop.com/product/chroma-luma-splitter
Discounted bundle available below!
For EU customers, price listed includes applicable VAT rate
€17,50 -
Commodore 64 breadbin badges
Breadbin badges for Sigma, silver label, dark etc.
Price range: €3,25 through €4,25 -
J-CPU64 6510/8500 replacement for the Commodore 64
The J-CPU64 has arrived!
- The long awaited MOS/CSG 6510/8500 CPU replacement is here! Jani’s second major hardware product after the very successful J-CIA64 comes in the form of the J-CPU64.
- Limited first batch stock, all pre-orders will be fulfilled first starting shipping from May 16th onwards.
Description and features:
- FPGA based replacement for MOS/CSG 6510 & 8500 CPU chips.
- Lower power requirements, less heat! Actually; not discernible heat at all.
- Complete logic and all features of the original IC implemented, including illegal opcodes for maximum compatibility with all your favorite games and demos.
- All diagnostic & software tests passed 100%, including all tests in Wolfgang Lorenz’s test suite and Vice-project’s CPU-tests.
- Hundreds of demos and games already tested, with no known compatibility issues in tons of different configurations.
- Physically about the same size as the original CPU and drops right in place of the original chip without any board modifications or soldering required.
- Tested with all C64 mainboard revisions, SX-64 and with modern clones like the EVO64, Blue Pearl and the iComp’s Reloaded MKII.
- Tested with modern chip replacements like the VIC-II Kawari, PLA replacements like PLAnkton, NeatPLA etc, and of course J-CIA.
- Load of peripheral hardware tested and found to be compatible including (but not limited to) different types of floppy drives, fast loaders, Ultimate-II+, SD2IEC, TapeCart, Kung-Fu Flash, EasyFlash, Tapuino and more.
- Specially designed clock out signal circuitry (PHI2) for super strong and stable clock signals, with sharp rising and falling signal edges ensuring maximum stability and compatibility.
For EU customers, price listed includes applicable VAT rate
€39,95 -
Space Saver Pro
The SpaceSaver Pro cable for the C64 and VIC20 CR* Â is THE solution to the inefficient use of space that traditional power cables cause by connecting to the power-plug in a straight line. Because of the elbow design, the power-cable leaves the computer at a 90 degree angle towards the back, reducing the cable footprint dramatically.
This high quality cable not only is fully injection moulded, it also has a built-in overvoltage protector on the 5V supply, to avoid damage by faulty power supplies. A small window in the connector allows you to see the led indicator, where green means all is ok, but red indicates an overvoltage. Whenever the 5V rail goes over the 5.4V threshold, the circuit inside will cut the power within nanoseconds, to prevent any harm to the chips inside your beloved machine.
Your power supply plugs right into the female DIN connector, and the 30cm long 20AWG grade wiring in between the connectors makes sure this cable can handle currents up to 3.5A. A grippy surface makes plugging in and removing the cable easy, avoids stress on the internal cable joints, and there is enough clearance to accommodate the many variances in case/socket depth, which prevents the cable casing from putting permanent stress on the power socket.
*The VIC20 CR (cost reduced) version uses the same power connector as the C64, and has a separate +5V rail which is susceptible to overvoltage from a bad PSU.
See the extend product description below for more details.
For EU customers, price listed includes applicable VAT rate
€17,95Space Saver Pro
€17,95 -
Price range: €9,00 through €11,0064K RAM Kit for C64C, Atari, MSX (2*81464/4464)
Price range: €9,00 through €11,00 -
Amiga CD32 Case sticker
Replica CD32 case sticker. Printed on high quality vinyl and finished with satin laminate layer.
€1,25€3,25Amiga CD32 Case sticker
€1,25€3,25 -
PCB Connector kit for the Commodore 64
Full PCB connector kit for Commodore 64 (All revisions)
€27,95
